Featured
How To Change A Flat Tore
How To Change A Flat Tore. Remove the lug nuts & tire. It’s good to know the steps involved in changing a flat tire, but having a subscription for roadside assistance is always a good idea for a backup plan.
With your hands, carefully tap. Try tugging at the rear derailleur with a minimal force so as to create extra space for the wheel to come out. Apply the parking brake and put car into park position.
Nothing Takes The Joy Out Of A Road Trip Like A Flat Tire.
It’s good to know the steps involved in changing a flat tire, but having a subscription for roadside assistance is always a good idea for a backup plan. Pull the flat tire off the car and set it aside so that it will not roll away or become a hazard. Take the lug wrench and use it as a jack handle to take the frame up far enough so there is 3 to 4 inches of clearance under the flat.
Once Loosened, Unscrew The Lug Nuts Completely.
Now, place your spare tire onto the wheel by lining up the holes with the bolts. As soon as you realize you have a flat tire, do not abruptly brake or turn. Remove the lug nuts & tire.
If You’re Not Using A Jack Stand, Then Slowly Lower The Jack Until You Can Remove The Jack.
Deploy the jack and lift your rig until the wheel that must be changed could spin without being obstructed. Screw the tool into the top hole and it’ll act as a guide to line up all the holes. Jack the car up until you can remove the jack stand.
Then, Unbolt The Wheel From The Rest Of The Hub And Put It In A Safe Location.
With your hands, carefully tap. Tighten all the nuts or bolts. Flat tire problems have a habit of happening when least expected.
Additional Equipment Needed To Change Your Tire Includes A Jack, A Lug Wrench And A Flat Tire Repair Kit.
Unscrew the lug nuts, set them aside where you won’t accidentally lose them. Step by step on how to. Every driver should, therefore, have the necessary skills and knowledge of changing a flat tire.
Comments
Post a Comment